Cisco Catalyst 9117 Access Point

• C9117AXI-x: Cisco Catalyst 9117

Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.

• Cisco Unified Wireless Network Software Release 8.9 or later
• Cisco IOS ® XE Software Release 16.11 or later

• Cisco Catalyst 9800 Series Wireless Controllers
• Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

• 8×8 MIMO with four spatial streams for 5-GHz band
• 4×4 MIMO with four spatial streams for 2.4-GHz band
• Maximal Ratio Combining (MRC)
• 20- and 40-MHz channels
• PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• Cyclic Shift Diversity (CSD) support

• 8×8 downlink MU-MIMO with eight spatial streams
• MRC
• 802.11ac beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 3.5 Gbps at 5 GHz
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• CSD support

• 8×8 MIMO with eight spatial streams for 5-GHz band
• 4×4 MIMO with four spatial streams for 2.4-GHz band
• Downlink OFDMA
• TWT
• MRC
• 802.11ax beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 5 Gbps at 5 GHz
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• CSD support

• 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
• 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth

• 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
• Management console port (RJ-45)
• USB 2.0 with up to 3.75W (enabled via future software)

• Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

• Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
• Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)

• 3.02 lb (1.4 kg)

• PMK, OKC, & 802.11r for fast Layer 2 roaming
• 802.11r and 802.11k
• Distributed or centralized layer 3 roaming

• 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)
• Cisco power injector, AIR-PWRINJ6=
• 802.3af PoE
• Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off.

• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
• Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
• Operating temperature: 32° to 122°F (0° to 50°C)
• Operating humidity: 10% to 90% (noncondensing)
• Operating altitude test: 40˚C, 9843 ft.

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4×4 to 2×2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled.

• 2048 MB DRAM
• 1024 MB flash

• Limited lifetime hardware warranty