Cisco Meraki MR46E Wireless Access Point

• 2.4 GHz 802.11b/g/n/ax client access radio
• 5 GHz 802.11a/n/ac/ax client access radio
• 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
• Concurrent operation of all three radios
• Supported frequency bands (country-specific restrictions apply):
  • 2.412-2.484 GHz
  • 5.150-5.250 GHz (UNII-1)
  • 5.250-5.350 GHz (UNII-2)
  • 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
  • 5.1725-5.825 GHz (UNII-3)

• UL/DL OFDMA, TWT support, BSS coloring
• 4×4 multiple input, multiple output (MIMO) with four spatial streams
• UL/DL SU-MIMO and MU-MIMO support
• Maximal ratio combining (MRC) and beamforming
• 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
• Up to 1024 QAM on both 2.4 GHz and 5 GHz bands
• Packet aggregation

• Power over Ethernet: 42.5-57 V (802.3at required; functionality-restricted 802.3af mode supported)
• Alternative 12 V DC input
• Power consumption: 18 W max (802.3at)
• Power over Ethernet injector and DC adapter sold separately

• All standard mounting hardware included
• Desktop, ceiling and wall mount capable
• Ceiling tile rail (9/16, 15/16, or 1 1/2″ flush or recessed rails), assorted cable junction boxes
• Bubble level on mounting cradle for accurate horizontal wall mounting

• Two security screw options included
• Kensington lock hard point
• Concealed mount plate with anti-tamper cable bay

• Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
• Humidity: 5 to 95%

• 9.84” x 4.72” x 1.42” (30.72 cm x 15.62 cm x 3.49 cm), not including desk mount feet or mount plate
• Weight: 29.98 oz (0.85 kg)

• List of compatible antennas: MA-ANT-3-A6/B6/C6/D6/E6/F6
• Individual antenna elements for each radio

• 1× 10/100/1000/2.5G BASE-T Ethernet (RJ45)
• 1× DC power connector (5.5 mm × 2.5 mm, center positive)

• Integrated Layer 7 firewall with mobile device policy management
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
• Flexible guest access with device isolation
• VLAN tagging (802.1Q) and tunneling with IPSec VPN
• PCI compliance reporting
• WEP**, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)**
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
• TKIP and AES encryption
• Enterprise Mobility Management (EMM) and Mobile Device Management (MDM) integration
• Cisco ISE integration for guest access and BYOD posturing

** software features can be enabled via firmware updates

• Advanced Power Save (U-APSD)
• WMM Access Categories with DSCP and 802.1p support
• Layer 7 application traffic identification and shaping

• PMK, OKC, and 802.11r for fast Layer 2 roaming
• Distributed or centralized Layer 3 roaming

• Embedded location analytics reporting and device tracking
• Global L7 traffic analytics reporting per network, per device, and per application

• 1 power/booting/firmware upgrade status

• RoHS
• For additional country-specific regulatory information, please contact Meraki Sales

• Lifetime hardware warranty with advanced replacement included

• EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC

• MR46E-HW: Meraki MR46E Cloud Managed 802.11ax AP
• MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
• MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
• MA-INJ-5-XX: Cisco Meraki 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
• MA-ANT-3-A6: Meraki Dipole Antenna (3.8/5.5 dBi)
• MA-ANT-3-B6: Meraki Dipole Antenna (3/5.7 dBi)
• MA-ANT-3-C6: Meraki Panel Omni Antenna
• MA-ANT-3-D6: Meraki Downtilt Panel Omni Antenna
• MA-ANT-3-E6: Meraki Wide Patch Antenna
• MA-ANT-3-F6: Meraki Narrow Patch Antenna
• Note: Meraki access point license required